CITJobs In Apprenticeships
Guide

How to Transfer an Apprenticeship to Another State

You don't move an apprenticeship across state lines so much as hand it from one sponsor to another. Here is what the rules guarantee, and what you have to negotiate.

Jobs In Apprenticeships Editorial8 min read

Key takeaways

  • Federal rules allow a transfer only to the same occupation, only with agreement from you and both sponsors, and always with a new apprenticeship agreement.
  • Your old sponsor must give you a transcript of on-the-job hours and related instruction. That document is the whole transfer, so get it before you leave.
  • If you already finished probation, DOL guidance says you can't be forced to serve it again in the same program, though a new sponsor may set one.
  • Licensing is a separate track. Hours that count for your apprenticeship do not automatically count for a license in the new state.
  • Line up the receiving sponsor before you quit or move. A cancellation without a receiving sponsor is a gap, not a transfer.

The short answer: you transfer to a sponsor, not to a state

People search for how to transfer an apprenticeship to another state as if there were a state-to-state handoff form. There isn't. A registered apprenticeship belongs to a program sponsor: a union-management committee (JATC), an employer, an association or a college. When you move, what actually happens is that one sponsor releases you and another one accepts you, and both tell the registration agency.

That framing matters because it tells you who holds the power. Your new state's apprenticeship office cannot force a sponsor to take you. A sponsor in the new city decides whether it has room, whether you meet its entry rules, and how much of your past training it will credit. The federal rules set a floor for how that is done, and that floor is worth knowing before you call anyone.

What the federal transfer rules actually require

The standards every registered program must follow live in 29 CFR 29.5. Paragraph (b)(13) covers transfers, and it is short. A transfer:

  • Must be agreed to by you and the apprenticeship committees or sponsors involved.
  • Comes with a transcript of your related instruction and on-the-job learning, which the transferring sponsor must give you.
  • Must be to the same occupation. An electrical apprentice can't transfer into a plumbing program and keep the hours.
  • Requires a brand-new apprenticeship agreement when you change sponsors.

The Department of Labor spelled out the mechanics in Bulletin 2010-18. Once all three parties agree, the old sponsor issues the transcript and sends copies to the apprenticeship field staff, the receiving sponsor and you. The bulletin also says the transferring apprentice must be evaluated and given full credit for previous experience, which lines up with paragraph (b)(12) of the regulation: sponsors must apply their advanced-standing rules to every applicant equally and pay the wage step that matches the credit they grant.

Probation after a transfer

This is the part apprentices worry about most. The regulation caps any probationary period at 25 percent of the program length or one year, whichever is shorter. Under the 2010 bulletin, an apprentice who finished probation and transfers within the same program can't be made to repeat it. If you were partway through, only the remaining probationary hours apply. A move to a different sponsor with a new agreement may come with a new probationary period, though DOL discourages using transfers to stack probation.

How to transfer an apprenticeship to another state, step by step

The order below protects your hours. Most horror stories come from doing step 5 before step 2.

  1. Confirm the occupation match. Find programs in the new area registered for the same occupation. Use the DOL Apprenticeship Finder and the new state's apprenticeship agency listings, then check the occupation title on the program, not just the trade name on the website.
  2. Contact the receiving sponsor first. Ask plainly: do you accept transfers, what are your minimum qualifications for a transfer, and how do you evaluate prior hours? Some sponsors have openings only at certain times of year.
  3. Talk to your current training director or sponsor. Tell them where you are going and ask them to agree to the transfer rather than just processing a cancellation. The reason code matters on your record.
  4. Request your transcript. It should show on-the-job hours by work process, related instruction hours and grades, your current wage period and your probation status. Keep your own copy and your pay stubs.
  5. Get the receiving sponsor's decision in writing. You want the credit they will grant and the wage step you will start at before the old agreement is closed.
  6. Sign the new apprenticeship agreement. The new sponsor registers it with its registration agency, which may be a state apprenticeship agency or the federal Office of Apprenticeship.
  7. Check your record. A few weeks after the move, confirm with the new sponsor that your hours and registration show correctly.
Union apprentices: committee-run programs often add their own steps. Proposed standards for a Northwest outside-line JATC, posted on Washington L&I's council agenda in 2025, describe transfer as direct entry: the apprentice must meet the program's minimum qualifications and apply, the old agreement is canceled once the receiving JATC accepts, and probation already served carries over in full. The Washington, DC electrical JATC's apprentice policies require transferees from another program to pass a drug test before final acceptance. Expect paperwork like that.

When you may not need to transfer at all

Sometimes the work moves, not you. If your employer sends you to a job in another state, the question is reciprocity, not transfer. Under 29 CFR 29.13(b)(7), a recognized state apprenticeship agency must grant reciprocal approval for federal purposes to apprentices and programs registered in another state when the sponsor asks for it. The catch is that the sponsor has to meet the receiving state's wage, hour and apprentice-ratio standards.

Some neighboring states go further. Washington, Oregon and Montana circulated an updated tri-state reciprocal agreement for feedback in 2025. The draft would let programs train apprentices in listed contiguous counties without registering everything twice, as long as the apprentice meets the licensing rules of the state where the work happens and is paid that state's ratios and wage rates. It was a draft for comment when we read it, so check its current status with the state agency before relying on it.

The practical rule: if you are on a traveling job and your employer is still your sponsor, ask your training director whether reciprocity is already in place. If you are moving for good and your employer is staying behind, you need a transfer.

Questions to ask the receiving sponsor

When you call a program in the new city, you are asking for something it doesn't have to give. Make the call easy to say yes to. Have your transcript ready, know your occupation title exactly as it appears on your agreement, and ask these questions in order:

  • Do you accept transfers from other registered programs in this occupation, and is there a waiting period or an application window?
  • What minimum qualifications do transferring apprentices have to meet? Some programs apply their full entry rules, including a drug test or a driver's license.
  • How do you evaluate prior on-the-job hours and related instruction? Who makes the call, and how long does it take?
  • What wage period would I start in if my hours are credited as documented?
  • Will I need to serve a probationary period with you?
  • Does your registration agency need anything from me directly?

Write down the answers and the name of the person you spoke with. If the answers sound good, ask for them in an email before you give notice at your current job.

If there's no matching program

Sometimes no sponsor in the new area runs your occupation, or none has openings. Your options then are to wait and stay registered where you are, to look for a sponsor in a nearby metro, or to start a different occupation as a new applicant. Hours from a different occupation won't move over as a transfer, though some sponsors may still weigh related experience when ranking applicants.

Licensing is a separate track

Your apprenticeship record and your trade license are two different things, and transfers expose the gap. In licensed trades, the state licensing board decides whether hours earned elsewhere count toward its exam, and it has its own forms.

Washington's electrical program is a good example of how specific this gets. Its electrician licensing page says candidates must start as an electrical trainee or have equivalent out-of-state or military experience, and sends out-of-state applicants to a separate application form with a qualification flowchart. The general journey-level exam requires 8,000 hours of experience. Applications go in by mail with documentation proving the experience.

So before you move, find the licensing board for your trade in the new state and ask two questions: will my out-of-state apprenticeship hours count toward your exam, and do I need a trainee or apprentice card to work legally on day one?

What carries over and what usually doesn't

ItemUsually carries over?What decides it
Documented on-the-job hours, same occupationYes, if the receiving sponsor credits themTranscript plus the new sponsor's evaluation
Related instruction hours and gradesOften, but sometimes mapped to a different curriculumNew sponsor's school; you may need to fill gaps
Completed probationWithin the same program, yes; with a new sponsor, maybe notDOL Bulletin 2010-18 and the new agreement
Your wage stepOnly if credit is grantedThe wage that matches the credited period under 29.5(b)(12)
Hours in a different occupationNo, not as a transferSame-occupation rule in 29.5(b)(13)
Trainee card or license statusNoThe new state's licensing board
Union membership and seniorityVaries by trade and localYour international's travel or transfer rules

Mistakes that cost apprentices hours

  • Quitting before the new sponsor says yes. If your agreement is canceled and nobody accepts you, you are not transferring. You are an applicant again. Our post on what partial hours are worth covers that scenario.
  • Relying on your memory of your hours. Keep signed progress reports and stubs. Transfers run on documents.
  • Assuming the trade name is the occupation. "Electrical" can mean inside wireman, residential wireman, lineman or maintenance electrician, each registered separately.
  • Ignoring the state agency question. Some states run their own registration and some are handled by the federal office. Our explainer on who regulates your apprenticeship shows how to tell.
  • Forgetting the license. A smooth apprenticeship transfer can still leave you unable to work legally if the new state needs a trainee card.

Bottom line

A transfer is a three-way agreement, not a right you can claim on your own. You get real protections: a transcript, same-occupation continuity, credit evaluated fairly, and no repeat of finished probation within a program. The receiving sponsor still decides whether to take you. Line up the new sponsor in writing, get your transcript, then cancel the old agreement. Check the licensing board separately, because it plays by different rules.

Frequently asked questions

Can I transfer my apprenticeship to another state?

Yes, if a registered sponsor in the new state accepts you in the same occupation and both sponsors agree. Federal rules require your old sponsor to give you a transcript of your hours and require a new apprenticeship agreement with the new sponsor. No agency can force a sponsor to accept you, so secure the receiving sponsor before you leave.

Do my apprenticeship hours transfer to a new program?

Documented hours in the same occupation can be credited, and DOL guidance says transferring apprentices must be evaluated and given full credit for previous experience. In practice the receiving sponsor maps your hours to its own work processes and wage steps, so get its credit decision in writing before your old agreement is canceled.

Will I have to do probation again after transferring?

If you finished probation and transfer within the same program, DOL Bulletin 2010-18 says you can't be required to repeat it. If you were partway through, only the remaining hours apply. A new sponsor with a new agreement may set a probation period, which can't exceed 25 percent of the program or one year.

Do apprenticeship hours from one state count toward a license in another?

Not automatically. Licensing boards set their own experience rules and forms. Washington, for example, routes out-of-state electrical applicants through a separate application with documentation of their experience. Contact the licensing board in your new state before you move and ask whether you need a trainee card to work.

Looking for an apprenticeship work?

Tell us your trade, location and experience. The Careers In Trades network routes you to employers who are actually hiring. Free for workers.

Sources

  1. eCFR — 29 CFR 29.5, Standards of apprenticeship
  2. U.S. Department of Labor — Bulletin 2010-18, Transfer of Apprentice
  3. Cornell LII — 29 CFR 29.13, Recognition of State Apprenticeship Agencies
  4. Washington L&I — Draft Updated Tri-State Reciprocal Agreement (2025)
  5. Washington L&I — Electrician licensing
  6. Washington L&I — Northwest Line JATC standards (council agenda document, 2025)
  7. Washington DC JATC (IBEW Local 26) — Apprentice Statement of Policies

Pay, licensing and program details change and vary by state, employer and local agreement. Verify with the linked sources and your state licensing board before making decisions.